DMACC Diesel Technology Required Tool List

REV: 10/01

24. Tool Box (suitable to hold the following tools, a roller box is suggested)

2. ½” Drive socket/ratchet set

breaker bar

extensions

3/8” –1” standard sockets

12 – 24 mm metric sockets

3. 3/8” Drive socket/ratchet set

breaker bar

extensions

3/8” – ¾” standard sockets

6 – 19 mm metric sockets

Torx bits 3/8” drive sockets

4. Wrenches

3/8” – 1” combination

6 – 22 mm metric combination

3/8” – 3/4” line wrenches

5. Standard screwdriver set

6. Phillips screwdriver set

7. Chisel and punch set

8. Pry Bars

20” rolling head pry bar

24” straight pry bar

9. Pliers

7 1/8” needle nose

9 1/4” channel lock type

7 1/4” diagonal cut

10” vise grip

Combination crimper/wire strippers

Piston ring installers

Locking ring – opens to 1 ¼” min.

10. Hammers

16 oz. Ball peen

32 oz. Ball peen

2 or 2 ½ lb. Hammer

24oz. Dead blow hammer

11. Allen wrench set (L type) 1/16” – 3/8”

12. Feeler gauges (.0015” - .035”)

Straight

Bent

24. Gasket scraper (heavy duty)

25. 6” steel ruler

26. 12’ steel tape measure

27. Hacksaw with the following blades 4-18 TPI and 4-24 TPI

28. Flat hand file with handle 10” mill

29. Flashlight with batteries

30. Oil filter wrench (should fit both small and large filters)

31. Pick-up magnet

32. Brake tools

brake adjusting tool 8”

brake retainer washer tool (small/large)

brake spring pliers, remove and replace

33. ½” drive torque wrench 0-200 ft/lb min.

23. Digital multi meter

read Volts – milli Amps – Ohms

Minimum 10 Mega Ohms impedance

With Auto Range

24. volt test light (non powered)

25. OSHA approved blow gun with ¼” NPT male plug

26. Safety glasses or Safety goggles